Huawei SmartLogger2000 User Manual page 35

SmartLogger2000
User Manual
Figure 3-5 Hole positions and dimensions (unit: mm)
Step 2 Drill holes by using a hammer drill and install expansion sleeves, washers, and tapping screws,
as shown in Figure 3-6.
Figure 3-6 Drilling holes and installing expansion sleeves, washers, and tapping screws (unit:
mm)
1.
(2016-06-20)
Put a hammer drill with a Ф6 mm drill bit on a marked hole position perpendicularly
against the wall and drill to a depth greater than or equal to 40 mm.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation
29