NEC UNIVERGE SV8300 System Maintenance Manual page 50

Ip pbx
Hide thumbs Also See for UNIVERGE SV8300:
Table of Contents

Advertisement

8. Registration NG Cause: XX-DRSY (XX=error notifications from DRS, Y=DRS No.)
[Output arbitrarily per component]
<Error Notification from XX=DRS>
XX
01
ID Unregistered (There are not ID data in PBX.)
02
Disabled (Use of the device which tried to be registered is restricted.)
03
Over Registration (The assigned ID/station number has been already registered.)
05
Disabled Number (The assigned fixed station number to be registered is disabled.)
07
Obtaining PH Failed (The device to be registered failed to obtain appropriate PH.)
09
Device Type Unrecognized (The registration chassis failed to recognize the device type.)
0F
Obtaining PH Failed Partly
10
Registration Overrun
11
Resource Disabled
12
Message Content Error
FF
DRS Connection Time Out
<Y=DRS number: 1 to 4>
1: Primary
9. Fault log reading timeout display
NOTE 1:
For the fault logs collection after the VoIPDB reset execution, the least channel number of the
VoIPDB is displayed.
NOTE 2:
The maximum eight records of reset cause and reset occurrence time can be displayed. Two
items are displayed per line, however this is displayed only when the data has been notified.
NOTE 3:
The counting items and its meaning are different according to the protocol type. Four items are
displayed per line, however this is displayed only when the data has been notified.
NOTE 4:
The maximum eight records of DRS No. and the cause of registration NG occurrence can be
displayed. Four items are displayed per line, however this is displayed only when the data has
been notified.
NOTE 5:
This is displayed if the fault log cannot be read from each IP component. It also is displayed if
the IP component does not provide the fault log collection.
2: Secondary
3: Tertiary
NOTE 5
Chapter 1 MAINTENANCE SERVICES
MEANING
4: Fourth
1-38
VoIP LOG COLLECTION
NOTE 4
NWA-033627-001 Rev.4.0
95ch1001.fm

Advertisement

Table of Contents
loading

Table of Contents