HOW TO READ THIS CHAPTER
In the programming procedure, the meaning of (1), (2) and marking are as follows:
(1): 1st Data
(2): 2nd Data
: Default
With the system data clear command (CM00, CM01), the data with this marking is automatically
assigned for each command.
OFF LINE
: Command with this marking can be used only under Off-Line mode of the CPU
blade.
To set Off-Line mode,
(1) Set SENSE switch on the CPU blade to "E" or "F".
(2) Press RESET switch on the CPU blade.
Chapter 1 MAINTENANCE SERVICES
1-2
HOW TO READ THIS CHAPTER
NWA-033627-001 Rev.4.0
95ch1001.fm