Qos Display On Ip Multiline Terminal; General Description - NEC UNIVERGE SV8300 System Maintenance Manual

QoS DISPLAY ON IP MULTILINE TERMINAL

General Description

This feature allows IP Multiline Terminal to display the Number of lost packets, CODEC type, and Pay-
load size of IP Multiline Terminal communication on the LCD by pressing the function key. This feature
also allows SIP Multiline Terminal to display the Number of lost packets, CODEC type, and Payload size
of SIP Multiline Terminal communication on the LCD by pressing the HELP key continuously.
Display Example:
When QoS Display Key is pressed while an IP Multiline Terminal communicates or HELP Key is pressed
continuously while a SIP Multiline Terminal communicates with the station number 3000, the LCD of IP
Multiline Terminal or SIP Multiline Terminal displays as follows:
Number of Lost Packets
1.Lost Packet:
2.Codec:
Up Down
Exit
CODEC Type
You can stop the QoS display with pressing Exit key. Press not the fixed EXIT button on far left, but the
Soft Key of Exit.
1:26 PM MON
S&R PICK
Exit
You can easily diagnose the communication fault of IP Multiline Terminal or SIP Multiline Terminal by
this feature.
34
G711u
Exit
Help
3000
28 MAR 2005
>>>>
Help
Chapter 1 MAINTENANCE SERVICES
QoS DISPLAY ON IP MULTILINE TERMINAL
Press Down
Exit
Press Up
Station Number
1-46
Payload Size
2.Codec: G711u
3.Payload 40ms
Up Down
NWA-033627-001 Rev.4.0
NOVEMBER/21/2008
Exit
Help
95ch1001.fm