NEC UNIVERGE SV8300 System Maintenance Manual page 55

A
CMEA Specify the output destination for the fault
logs/call logs.
NOTE: Set the output port for fault logs/call
logs by CM40 Y=00.
Specify the collection method of fault logs/call
logs.
Specify whether fault logs are collected when
the IP Stations login to the system or the
VoIPDB is in online status.
CM40 Specify the RS port to collect VoIP log.
Specify the data length for the RS port.
NOTE: When using CPU RS-232C port for
PCPro, set the default.
Specify the RS port to make effective the
parity check.
NOTE: When using CPU RS-232C port for
PCPro, set the default.
Specify the kind of parity for the RS port.
NOTE: When using CPU RS-232C port for
PCPro, set the default.
B
DESCRIPTION
Chapter 1 MAINTENANCE SERVICES
• Y=6
(1) 00: Output destination of logs
(2) 2 : RS port of CPU
3 : Not output
• Y=6
(1) 02: Collection method of logs
(2) 0 : Not overwritten
1 : Overwrite
• Y=6
(1) 10: Fault log collection
(2) 0 : To collect
1 : Not collected
• Y=00
(1) 0: Unit01 Port1
1: Unit01 Port2
(2) 08
NONE : No data
• Y=01
(1) 0: Unit01 Port1
1: Unit01 Port2
(2) 0 : 7 bit
1 : 8 bit
• Y=02
(1) 0: Unit01 Port1
1: Unit01 Port2
(2) 0 : Effective
1 : Ineffective
• Y=03
(1) 0: Unit01 Port1
1: Unit01 Port2
(2) 0 : Odd parity
1 : Even parity
1-43
VoIP LOG COLLECTION
DATA
: VoIP log collection
NWA-033627-001 Rev.4.0
95ch1001.fm
JULY/17/2009