Replacement Of The M2 Fan Motor - Electrolux IC4 4819 FFS Service Manual

Before any intervention it is essential to cut off all supply of the machine
Repair

Replacement of the M2 fan motor:

Remove / Assembly:
1. Remove the right side frame of the machine.
2. Disconnect the wire of the faulty fan motor.
3. Remove the extensible hose.
4. Remove the fan motor assembly (fan motor + support + spiral + nozzle).
5. Remove the turbine of the fan motor and if necessary the spiral.
6. Remove the fan motor of its support and replace it by a new one.
7. Put the turbine on the fan motor.
8. Put the fan motor assembly in the casing.
9. Put the extensible hose on the nozzle.
10. Connect the wire on the new fan motor.
11. Switch on the machine and check the operation of the fan machine.
12. Put back the frame.
04102011/GB
06.2009
Ventilation and motion of the machine
(electricity, steam, water, gas, compressed air...).
23
9