Service
Manual
Mechanical installation
Preparation of the ground and machine
- Dry-clean carefully the ground and the soles of the machine.
Electrical safety device
- Earthing is compulsory.
Levelling the machine
- Adjust the nuts with a spanner and adjust the dryer ironer so that it is horizontal and that its
four stands are perfectly vertical.
- Check with a spirit level placed on the sole plate for the longitudinal direction and the
machine top cover for the transverse direction (see sketch). The maximum stand height
adjustment is 80 mm (3").
- Tighten the lock nuts after adjustment.
04102011/GB
51.2010
Installation
10
D1106
3