Electrolux IC4 4819 FFS Service Manual page 78

21
Designations (next)
DP27 Detector, cell n°4: To determine the width of linen for the cross folding
DP28 Detector, To detect the linen at the outlet of cross folding
DP41 Detector, To detect the height of the linen pile in the stacker
DP42 Detector, To detect the linen at the inlet of the stacker
DP43 Detector, To detect the opening/closing position of the stacker table
DP71 Detector, To detect the linen on the left clamp
DP72 Detector, To detect the linen on the right clamp
DP73 Detector, To detect the line in the smoothing system
E1 Electromagnet, To activate/deactivate the clutch of folding arm
E2 Electromagnet, To block the linen on the left clamp
E3 Electromagnet, To block the linen on the right clamp
F2 Thermal fuse, To protect against overheating (T°C > 240°C)
FC510 Limit switch, To stop the cross motion when the rear housing is opened
FC71 Limit switch, To stop the spacing clamps
FC72 Limit switch, To stop the rapprochement of clamps
FC73 Limit switch, To stop the advancing of clamps
Limit switch, To determine the opening of clamps to put down the line on the
FC74
feeding table
FC75 Limit switch, To stop the return of clamps
H411 Buzzer, Linen error
H61 Indicator, Rear evacuation of linen
KA1 Relay, To supply the motor of spacing clamps
KA10 Relay, Gas error
KA11 Relay, Product of combustion control
KA''7 Time heating relay
KM1 Contactor, To supply the converter
KM2 Contactor, To supply the motor of fan
KM3 Contactor, To supply the motor of feeding table vacuum
KM6 Contactor, To supply the 1
KM7 Contactor, To supply the 2
KM8 Contactor, To supply the 3
KM9 Contactor, To supply the clutch of folding arm
KM10 Contactor of ejection roller in high position
KM11 Contactor of ejection roller in low position
KM12 Contactor, To supply the motor of ironing cylinder motion
KM13 Contactor, To supply the motor of stacker table motion
KM14 Contactor, To supply the motor of the opening of the stacker table
KM15 Contactor, To supply the motor of rear evacuation of line
M1 Motor, Motion of ironing cylinder
M2 Motor, Fan machine
4
Control unit
group of heating elements
st
group of heating elements
nd
group of heating elements
rd
Service
Manual
04102011/GB
43.2015