Fastening The Cabinet To The Floor And Wall (Non-Marine Units) - ABB ACS800-U7 Hardware Manual

32

Fastening the cabinet to the floor and wall (non-marine units)

Fasten the cabinet to the floor either with the outside fastening brackets from front
and back, or by the fastening holes inside the cabinet. When fastening at the back is
not possible, fasten the cabinet at the top using L-brackets bolted to the holes of the
lifting lugs (M16 bolt). The cabinet can be fastened against a wall or back to back
with another cabinet. See chapter
vertical fastening points. Height adjustment can be done by using metal shims
between the bottom frame and floor.
Fastening points when installed
back against wall
> 400 mm
(15.75 in.)
Fastening the cabinet at the top
by using L-brackets (side view)
Mechanical installation
IP21/22/42
Top clearance
L-bracket
M16 bolt
Cabinet top
Dimensional drawings
Fastening points when installed
back against back
320 mm (12.28 in.) for fan replacement
in frame sizes R7 and R8
> 400 mm
(15.75 in.)
for the horizontal and
IP54