Replacing The Drive Module Fan (R8) - ABB ACS800-U7 Hardware Manual
Acs800
45 to 560 kw; 50 to 600 hp
Hide thumbs
Also See for ACS800-U7:
- Firmware manual (214 pages) ,
- Hardware manual (96 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
97
Replacing the drive module fan (R8)
1. Remove the front cover.
2. Disconnect the fan capacitor and power supply wires.
3. Undo the red fastening screws of the plastic side cover of the fan. Shift the cover
to the right to free its right-hand edge and lift the cover off.
4. Undo the red fastening screws of the fan.
5. Lift the fan out of the cabinet.
6. Install the new fan and fan capacitor in reverse order to the above.
2
4
3
5
2
4
3
Maintenance
Advertisement
Table of Contents
