34
Fastening the cabinet through the holes inside the cabinet
The cabinet can be fastened to the floor using the fastening holes inside the cabinet,
if they are available and accessible. The maximum allowed distance between the
fastening points is 800 mm (31.50 in.).
Cubicle width
mm [in.]
200 [7.87]
400 [15.75]
600 [23.62]
800 [31.50]
1000 [39.37]
1200 [47.24]
Fastening bolt: M10 to M12 (3/8" to 1/2").
Mechanical installation
a
Fastening hole distance in mm [in.]
a
b
a
a: 50 [1.97]
a: 250 [9.84]
a: 450 [17.71]
a: 650 [25.29]
a: 350 [13.78], b: 150 [5.91], a: 350 [13.78]
a: 450 [17.71], b: 150 [5.91], a: 450 [17.71]
Side plates of the cabinet: 15 mm
Back plate of the cabinet: 10 mm
Gap between the 200 mm, 400 mm, 600 mm,
800 mm, 1000 mm and 1500 mm cubicles:
IP20...42
31 mm [1.22]
IP54
0.5
1