Mechanical Installation; What This Chapter Contains; Moving The Unit - ABB ACS800-U7 Hardware Manual

Mechanical installation

What this chapter contains

This chapter describes the mechanical installation procedure of the drive.

Moving the unit

Move the transport package by truck and pallet truck to the installation site.
View of cabinet laid on its back
It is allowed to tilt the drive if required, or move it on its back
when supported properly from below. Note: It is not allowed
to move a unit with sine filter (+E206) on its back.
WARNING! Lift the drive by the upper part only using the lifting lugs/bars attached to
the top of the unit.
Cabinet back panel
Support
Mechanical installation
29