Setup - Siemens FDA241 Technical Manual

Structure and function
3

Setup

3.2
Overview
22
Building Technologies
Fire Safety
Setup
Components
Position Part
1 Housing cover
2 Front indicator
3 Opening
4 Back box
5 Interface card
6 Air inlet
7 Detection chamber
8 Internal indicator
9 Aspiration unit
10 Type plate
Function
-
Operating indicators and fault indicators,
connected to the interface card by a cable
Cable entry
Wall mounting with screws
Connections to external devices and signal
equipment. Depending on the version of the
aspirating smoke detector, not all connections are
available. If the aspirating smoke detector is
operated on a FDnet/C-NET detector line, certain
outputs are not active. See the chapter 'Function
[➙ 34]'.
Pipe system connection
Smoke sensor with flow monitoring
Alarm indicator, activate normalization
Fan for aspirating the air.
Relevant identification and detector data
A6V10334410_h_en_--
2015-09-29