Siemens FDA241 Technical Manual page 75

Example representation of monitoring for open line and short-circuit when using an input/output module FDCIO222
1 Fire control panel
2 Detector line
3 Input/output module FDCIO222
Building Technologies
Fire Safety
Variant 2 (for aspirating smoke detectors FDA241 or FDA221)
Input/output module used:
Monitoring:
For the monitoring resistors (5), observe the device-specific specifications for the
input/output module used. You will find this information in the example shown with
the input/output module FDCIO222 in document 007023.
FDCIO222
For open line and short-circuit
4a, 4b Monitoring resistors for GPI input
(see chapter 'Configurable 'GPI' input [➙ 68]')
5 Monitoring resistors
Mounting / Installation
Installation
A6V10334410_h_en_--
2015-09-29
5
75