22.5
Compatibility (detector <–> line type)
Line type 11
Line termination with Transzorb 20 V
Standard application, also for Ex detectors via
DC1192
Line type 1
Line termination with EOL22(Ex)
for older detectors, also for mixed lines (newer
and older detector types)
Note:
replaces line type 2
–
Line type 3 (Ex)
Via safety barrier SB2 and line termination
EOL22 (Ex)
For Ex detectors with limitations
Note:
–
replaces line type 13
Building Technologies
Fire Safety & Security Products
Incompatible
AT3
–
ATAN3
–
MS6 detectors
–
–
External response indicators with incandescent lamps
SE20 with incandescent lamp as response indicator
–
FES 7.5 detectors
–
–
220 V detectors
Compatible
AlgoRex detectors:
DO110x , DT110x , DM110x, DC1192
Older detectors:
MS716 , MS9 , MLK20 , T2416/18 , D2417 , SE22, AT4x, AT5x without SE2
Base: Z74*, Z74A*, Z90, Z94, Z96
* Limitations:
Z74 and Z74A only from the 1988 model (year index W)
D900 only from the 1983 model (year index R)
–> if in doubt use line type 1
Ex detectors (without restrictions)
used via DC1192 with SB3:
Compatible
AlgoRex detectors:
DLO1191, (with mixed lines also DO110x, DT110x, DM110x, DC1192)
Older detectors:
MS6* , MS7*, MS9 , MS24 , SE20* , SE22 , MLK20, AT4x, AT5x, SE2
Base electronics: Z70, Z72, Z72A, Z74, Z74A, Z90, Z94, Z96
Limitations: For MS6 and MS7 note the listed detector types and applications as stated
under 'Incompatibility'
Not permissible with line type 2: DO110x, DLO1191
For Explosion hazard area with limitations:
Only with safety barrier SB2
–
Only without short to earth monitoring
–
Only 1 Ex-line per installation
–
or
several Ex lines, however with a common ground connection off all SB2s to the con-
–
trol unit, whereby the ground conductor must have a min. cross-sectional area of
2
1.5 mm
and be no longer then 50 m
Comply with the local safety regulations
Compatible
DO110x Ex, DT110x Ex
F911, D901, D921 with base Z91C, Z94C
D2401 Ex, S2406 Ex
F6A Ex , D6A Ex
Not permissible with line type 13: DO110x Ex
E3M080 Line module "Collective"
DO110x Ex, DT110x Ex
F911, D901, D921 with base Z91C/Z94C
D2401 Ex, S2406Ex
F6A Ex, D6A Ex
95
001260_k_en_--.doc
02.2005