Siemens SINUMERIK 840D sl Operating Manual page 129

Requirement
Simulation is running and an alarm is active.
Procedure
Acknowledgement symbols
Symbol
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
1. Press the "Program control" and "Alarm" softkeys.
The "Simulation Alarms" window is opened and a list of all pending
alarms is displayed.
Press the "Acknowledge alarm" softkey to reset the simulation alarms
indicated by the Reset or Cancel symbol.
The simulation can be continued.
- OR -
Press the "Simulation Power On" softkey to reset a simulation alarm
indicated by the Power On symbol.
The simulation is terminated and loaded again.
Meaning
Cancel symbol
Reset symbol
Power On symbol
Machining the workpiece
3.10 Simulating a machining operation
129