Siemens SINUMERIK 840D sl Operating Manual page 31

Changing the operating area
You can call the "Machine" operating area directly using the key on the operator panel.
Changing the operating mode
You can select a mode or submode directly using the keys on the machine control panel or
using the vertical softkeys in the main menu.
General keys and softkeys
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
Press the "MENU SELECT" key and select the desired operating area using
the horizontal softkey bar.
Select the "Machine" operating area
When the symbol appears to the right of the dialog line on the user
interface, you can change the horizontal softkey bar within an operating
area. To do so, press the menu forward key.
The symbol indicates that you are in the expanded softkey bar.
Pressing the key again will take you back to the original horizontal softkey
bar.
Use the ">>" softkey to open a new vertical softkey bar.
Use the "<<" softkey to return to the previous vertical softkey bar.
Use this softkey to close the open window.
Use the "Cancel" softkey to exit a window without accepting the entered
values and return to the next highest window.
When you have entered all the necessary parameters in the parameter
screen form correctly, you can close the window and save the parameters
using the "Accept" softkey. The values you entered are applied to a
program.
Use the "OK" softkey to initiate an action immediately, e.g. to rename or
delete a program.
Introduction
1.4 User interface
31