Starting And Stopping The Spindle Manually - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
2.9.2.3
Starting and stopping the spindle manually
Procedure
Note
Changing the spindle speed
If you enter the speed in the "Spindle" field while the spindle is rotating, the new speed is
applied.
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
1.
Select the "T, S, M" softkey in "JOG" mode.
2.
Select the desired spindle (e.g. S1) and enter the desired spindle
speed or cutting speed in the right-hand entry field.
The spindle remains stationary.
3.
If the machine has a gearbox for the spindle, set the gearing step.
4
Select a spindle direction of rotation (clockwise or counterclockwise) in
the "Spindle M function" field.
5.
Press the "CYCLE START" key.
The spindle rotates.
6.
Select the "Stop" setting in the "Spindle M function" field.
Press the "CYCLE START" key.
The spindle stops.
Setting up the machine
2.9 Manual mode
73
Advertisement
Table of Contents
