Storage; Compliance - ABB XSeriesG4 User Manual

WARNING – Bodily injury. For electrical connections, the user must use sufficiently insulated tools according to
the EN 60 900 standard.
Follow the applicable standards, regulations, and recommendations for installation, including:
–
The construction and operation of electrical installations. For example, follow the regulation for technical working materials
(safety guidelines for tools).
–
Explosion protection, if transmitters with explosion protection are installed.
The device can be operated at high levels of pressure and with corrosive media. Serious injury and/or considerable material
damage can result if the transmitter is handled incorrectly. Ensure compliance with the regulations applicable in the country of
use when working with transmitters.
Additional safety advice concerning the operation of the equipment described in this manual or relevant safety data sheets
(where applicable), along with information about spare parts and customer service, can be obtained by contacting the
manufacturer at the address indicated on the back cover of this manual.

Storage

The device does not require any special treatment if stored as dispatched and within the specified ambient conditions. Although
there is no limit to the storage period, the warranty conditions as agreed with the Company and as specified in the order
acknowledgment remain unaffected.

Compliance

EU Directive 2012/19/EU - Waste Electrical and Electronic Equipment (WEEE)
ABB Industrial Automation, Measurement and Analytics, is committed to actively protecting the environment. Do not dispose of
WEEE as unsorted municipal waste. Collect WEEE separately. Participation in the management of WEEE is critical to the
success of WEEE collection.
Electrical and electronic equipment marked using the crossed-out wheeled bin symbol shall not be mixed with
general household waste. Correct disposal at a recycling facility will help save valuable resources and prevent
potential negative effects on health and the environment. These steps ensure compliance with the Waste Electrical
and Electronic Equipment (WEEE) Directive.
Waste electrical and electronic equipment (WEEE) shall be treated separately using the national collection framework available
to customers for the return, recycling, and treatment of WEEE.
ix