Figure 45: Setup For Local Communication - ABB XSeriesG4 User Manual

Under Communications, select Serial port.
Under Connection parameters, expand the PCCU Com. Port drop down list to select the Com port designated for the
RS-232 communication on the PC.
Click Close to exit setup and return to the PCCU main screen.
Click the Entry icon on the top menu bar. For other screen options, click on the Connect Icon instead (left-most icon at
the top of the screen). The Local Connect screen displays other screen options in addition to the Entry screen. When the
selected screen displays, you have connected successfully to the device
NOTE: If the Invalid Security Code screen should appear, enter four zeros (0000) for the new code and click OK.
G4
The XRC should have defaulted to 0000 on startup.
If the meter has been given a security code, enter that code in the PCCU32 System Setup screen (see Figure 45).
However, if the meter has been COLD-started, the security code will be reset to factory default and historical data
will be lost.

Figure 45: Setup for local communication

XSeriesG4 Remote Controller User's manual 2103334 Rev. AB | 45
3 XRCG4 startup