Figure 57: Loaded Credit Key Status; Figure 58: Credit Key Telephone Update - ABB XSeriesG4 User Manual

Adding credits to the credit key by telephone
Credit keys ordered from Totalflow come with a specified number of the various credits; however, more or different credits may
be needed in the future.
Open PCCU32 7.0 (or later), but do not connect to the unit.
Go to the credit key License Utility (Operate > File Utilities > Credit Key License Utility).
Insert the credit key into an available USB port.
Select Do Phone Update (Figure 58).
The user will be asked to call Totalflow Order Entry, and insure that the credit key is plugged in.
NOTE: If the user inserts the credit key in a different USB port on the computer, it will need to be installed for that
new USB port. In other words, the credit key must be installed on each available USB port if not using the same
USB port each time.
Click OK when connected with an Order Entry clerk.

Figure 57: Loaded credit key status

Figure 58: Credit key telephone update

XSeriesG4 Remote Controller User's manual 2103334 Rev. AB | 61
3 XRCG4 startup