NEC Univerge SV8100 VM8000 InMail System Manual page 103

VM8000
6.
7.
8.
9.
InMail System Guide
47-14-05 Screened Transfer Timeout (Scrn Trf Timeout)
Set how long a Screened Transfer from the Directory Dialing Mailbox will
ring an unanswered extension before recalling. The entries are 1~255
seconds or 0 for no recall.
By default, the Screened Transfer Timeout interval is 15 seconds.

To change the amount of time Directory Dialing callers have to dial letters:
47-14-06 Time Limit for Dialing Commands (Dialing Timeout)
Enter the new timeout duration (0~99 seconds).
If the caller waits too long to dial, the Directory Dialing Message repeats.
By default, Directory Dialing callers have 5 seconds to dial letters.

To record a Directory Dialing Message:
Refer to Operation on page
The Directory Dialing Message is the Instruction Menu for the Call Routing Mail-
box programmed as a Directory Dialing Mailbox.
By default (without a custom message recorded), the Directory Dialing Message is,

"Please enter one or more letters of the person's name, then press the pound key."
47-01-04 Non-Subscriber Message Length (Mbox Msg Length)
This option sets the maximum message length (1~4095 seconds) for
Instruction Menus.
By default, this option is 120 seconds.

Enable or disable the ability of the Directory Dialing Mailbox to detect and route
incoming faxes.
47-14-07 Fax Detection (Fax Detection)
Enter 1 to enable Fax Detection; 0 to disable. If enabled, when the Directory
Dialing Mailbox detects incoming fax CNG tone, it routes the call to the fax
extension specified in 47-01-06 Fax Extension.
See Fax Detection on page 2-93
By default, Fax Detection is disabled (N).

Enable the Directory Dialing Mailbox caller to dial 0 for other options or # to
return to the Automated Attendant:
47-14-08 Next Call Routing Mailbox (Next CR Mbox)
Assign a Next Call Routing Mailbox (1~32) to the Directory Dialing Mailbox.
To remove an assignment, press Hold.
Once assigned, dialing # returns to the Automated Attendant. Dialing 0
follows the 0 action of the Next Call Routing Mailbox.
By default, there is no Next Call Routing Mailbox assigned.

2-77.
for more.
Issue 1.0
2 - 75