NEC Univerge SV8100 VM8000 InMail System Manual page 171

VM8000
Operation
To log on to your Subscriber Mailbox:
Press Message.
-OR-
Press Voice mail key (PGM 15-07 or SC 751: 01 + Pilot e.g. 200).
-OR-
From an on-premise single line telephone, lift handset and dial *8.
To log on to your Guest Mailbox or your Subscriber Mailbox from a coworker's extension:
Press the Speaker key + Dial the VM8000 InMail master number (e.g., 200) + Dial your
mailbox number.
To log on to your Subscriber Mailbox from the Automated Attendant:
1.
2.
InMail System Guide
For example, to have the Automated Attendant request callers to enter the
H
number of the Subscriber Mailbox into which they wish to log, for key 3
enter LOGON for the Action and N for the corresponding Number. When
callers dial 3, they hear, "Please enter your mailbox number."
To have VM8000 InMail require Automated Attendant callers to enter a
Subscriber Mailbox to log into (without playing an announcement), enter XXX in
the corresponding Number option. The key you choose must represent the first
digit in the Subscriber Mailbox numbers.
For example, to allow callers to log on to mailboxes 101~199, for key 3
H
enter LOGON for the Action and XXX for the corresponding Number.
To enter an X, press LK2.
H
To log into any valid Subscriber Mailbox, enter IXXX in the corresponding
Number option.
For example, to allow callers to dial 1 plus any Subscriber Mailbox number
H
to log on, for key 1 enter LOGON for the Action and IXXX for the
corresponding Number.
To enter an I, press LK3.To enter an X, press LK2.
H
See Automated Attendant on page 2-45
InMail to answer outside calls.
By default, key # Action = LOGON and Number = None.

Wait for the Automated Attendant to answer.
Dial # and your mailbox number.
This option may be different in your system. Check with your Communications Manager.

Logging On to Your Mailbox
for more on how to set up VM8000
Issue 1.0
2 - 143