NEC Univerge SV8100 VM8000 InMail System Manual page 322

Issue 1.0
3 - 36
47-06-03 Auto Erase/Save of Messages (Auto Erase/Save)
Use this option to determine what happens when a Subscriber Mailbox user
completely listens to a new message and then exits their mailbox without
either saving (SA) or erasing (E) the message. Depending on the setting of
this option, VM8000 InMail will either automatically save or erase the
message. If the mailbox user hangs up before listening to the entire new
message, In-Mail retains the message as a new message.
See Auto Erase or Save on page 2-41

See Routing Mailbox on page 2-211

See Voice Mail Overflow on page 2-249

Options
(Erase)
0
After the subscriber listens to the entire new message and hangs up,
In-Mail erases the message.
(Save)
1
After the subscriber listens to the entire new message and hangs up,
In-Mail saves the message.
Default
(Save) (see above).
1
47-06-05 Recording Conversation Beep (Rec Conv Beep)
Use this option to enable or disable the Conversation Record beep. If
enabled, all parties on a call hear the voice prompt Recording followed by a
single beep when the extension user initiates Conversation Record. If
disabled, the voice prompt and beep do not occur. When you disable the
Conversation Record beep, the following voice prompts do not occur while
VM8000 InMail records the conversation:
"Recording" (followed by a beep)
H
"That mailbox is full" (if the mailbox message storage capacity is reached)
H
"You have reached the recording limit" (if the recorded message is too long)
H
The SV8100 telephone system software provides an additional
Conversation Record beep. This beep repeats according to the setting of
Program 45-01-06 Voice Mail Integration Options: Record Alert Tone
Interval Time (0~64800 seconds). To disable the SV8100 telephone system
Conversation Record beep, enter 0 for this option.
See Live Record on page 2-139

See Routing Mailbox on page 2-211

See Voice Mail Overflow on page 2-249

Options
1 (Yes - enabled)
0 (No - disabled)
Default
1 (Yes - enabled)
for more.
for more.
for more.
for more.
for more.
for more.
VM8000
Programming