NEC Univerge SV8100 VM8000 InMail System Manual page 308

Issue 1.0
47-01 Program Entry
Speaker + #*#* + Password (12345678) + Transfer + 4701 + Option.
01 DSPDB VM Type (0=VM8000 InMail, 1=VRS) [0]
LK1=VM8000 InMail, LK2=VRS
02 VM8000 InMail Master Name (See
InMail ##]
03 Subs Msg Length (1~4095) [120]
04 Mbox Msg Length (1~4095) [120]
05 Msg Bkup/Adv Time (1~60) [5]
06 Fax Extension (Extension number or no entry, entered by pressing Hold) [No entry]
07 Pager CBack (Digits, M=Number of messages, X=Extension number) [X*M#]
LK1=M, LK2=X
08 Pager Dial Delay (0~99) [9]
09 Notify Pager Intvl (1~255) [15]
10 Notify N-Pgr intvl (1~255) [20]
11 Notify Busy Intvl (1~255) [15]
12 Notify RNA Intvl (1~255) [30]
13 Notify RNA Rings (1~99) [5]
14 Notify Call Attmpt (1~99) [5]
15 Retry Until Ack (1=Yes - enabled, 0=No - disabled) [0]
16 Name Format (0=First-Last, 1=Last-First) [0]
Press this: To do this:
Transfer Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
-1 +1 Scroll backwards (-1) or forwards (+1) through the list of available entries.
When editing an entry, moves the cursor left or right.
Conf When editing an entry, delete the character to the left of the cursor.
Hold When editing an entry, Hold erases the entire entry from the display.
Line Keys (LK) Where indicated, press a line key to enter a specific value for the selected option.
Answer Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
Scroll consecutively backwards or forwards through selected Option or Series.
3 - 22
47-01 VM8000 InMail System Options Program Entry
(Entry Range) [Default Setting]
Navigation
Keys for Entering Names on page
Editing
VM8000
3-15) [VM8000
Programming