NEC Univerge SV8100 VM8000 InMail System Manual page 323

VM8000
InMail System Guide
47-06-06 Message Waiting Lamp (Update MW Lamp)
Use this option to enable or disable Message Waiting lamp at the extension
associated with the Subscriber mailbox. For Subscriber Mailboxes, you
should leave this option enabled. For Guest Mailboxes, leave this option
disabled.
See Guest Mailbox

See Routing Mailbox

See Message Waiting Lamp

See Subscriber Mailbox

See Voice Mail Overflow

Options
1 (Yes - enabled)
0 (No - disabled)
Default
1 (Yes - enabled)
47-06-07 Auto Attendant Do Not Disturb (Auto-ATT DND)
Use this option to enable or disable Auto Attendant Do Not Disturb. When a
subscriber enables Auto Attendant Do Not Disturb, an Automated Attendant
caller routes directly to the mailbox, hears the greeting, and is asked to
leave a message. A subscriber can also enable Auto Attendant Do Not
Disturb while recording their mailbox greeting.
See Auto Attendant Do Not Disturb

See Routing Mailbox

See Voice Mail Overflow

Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
47-06-08 Forced Unscreened Transfer (Forced UTRF)
Use this option to enable or disable Automated Attendant Forced
Unscreened Transfer for the Subscriber Mailbox. If enabled, each Screened
Transfer (TRF) to the extension is converted to an Unscreened Transfer
(UTRF). If disabled, Screened Transfers from the Automated Attendant
occur normally.
See Forced Unscreened Transfer

See Routing Mailbox

See Voice Mail Overflow

Options
1 (Yes - enabled)
0 (No - disabled)
for more.
for more.
for more.
for more.
for more.
for more.
for more.
for more.
for more.
for more.
for more.
Issue 1.0
3 - 37