NEC Univerge SV8100 VM8000 InMail System Manual page 290

Issue 1.0
Programming
1.
2.
3 - 4
At all other times, the Default Mailbox answers – also using Call Routing
H
Mailbox 1.
Dial Action Table 1 enables the following usage:
H
Dial system extensions (if installed) 101~199, 3101~3257 and 3301~3457.
Ì
Dial 0 for an operator (extension 101).
Ì
Dial * + Extension to leave a Quick Message in a mailbox.
Ì
Dial # + Extension to remotely log on to their mailbox.
Ì
Wait on the line to be automatically routed to the operator.
Ì
Set up trunks as DILs.
22-02-01 Incoming Call Trunk Setup
Assign Service Type 4 to each trunk you want to be a DIL. Make a separate
entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).

Have the DILs terminate to VM8000 InMail extension.
22-07-01 DIL Assignment
For each trunk you designate as a DIL, enter the VM8000 InMail group pilot
number. Make a separate entry for each Night Service mode.
By default, there are no DIL destinations programmed.

VM8000
Programming