Issue 1.0
Selecting the CompactFlash Card
After inserting the VM8000 InMail CompactFlash card into the reader, it must be
selected.
1.
2.
4 - 6
From the InMail
Utility Main
Screen
(Figure
4-5), click
Select.
Figure 4-6 Utility
Select InMail
Card Screen
is
displayed.
If the InMail
CompactFlash
Card is
changed in the
middle of an
InMail Utility session, click Select to read the new card.
Use the
drop-
down box
on the
Utility
Select
InMail
Card
Screen
(Figure
4-6) to
select the
card
(Device)
Device: The card reader
drive ID or volume label
and click
OK.
Figure 4-7 Updated InMail Portion of InMail Utility Main Screen
The
InMail
Card
portion of the Main Screen updates with the card information. (Refer to
Updated InMail Portion of InMail Utility Main
Figure 4-6 Utility Select InMail Card Screen
Status: Indicates the
In-Mail Utility is ready
to use the installed
card.
(if any).
Screen.)
VM8000
Device Select the InMail
card from the drop-down
box.
Type: Type of
InMail
Prompt Version: The
version of the system
prompts on the In-Mail
CompactFlash card.
Figure 4-7
VM8000 InMail Utility