Sd Detail; System (1/2) - Panasonic AK-HRP200G Operating Instructions Manual

ROP.menu.setting.
(continued)
Item Display
MEM.A.WIDTH
MEM.A.SATU
MEM.B.CRISP
MEM.B.PHASE
MEM.B.WIDTH
MEM.B.SATU
ZEBRA.SWITCH
EFFECT.
MEMORY
SD.DETAIL
→＊＊ ＳＤ ＤＥＴＡＩＬ ＊＊
ＤＥＴＡＩＬ ＳＷＩＴＣＨ
Ｖ ＤＥＴＡＩＬ
Ｈ ＤＥＴＡＩＬ
ＣＲＩＳＰ
ＰＥＡＫ１
ＰＥＡＫ２
ＬＥＶＥＬ ＤＥＰＥＮＤＥＮＴ
ＤＡＲＫ ＤＥＴＡＩＬ
Item Display
DETAIL.SWITCH
V.DETAIL
H.DETAIL
CRISP
PEAK1 1.89M/2.18M/
2.56M/3.17M/
4.0M/5.28M/
28
Function
0 Expands the width of skin tone
‫׀‬
areas in memory bank A in a
255 range from 0 to 255.
0 Changes the saturation of skin
‫׀‬ tone areas in memory bank A in
255 a range of 0 to 255.
-63 Removes very faint noise
‫׀‬ components from detail
0 components in skin tone areas
‫׀‬ in memory bank B.
63
0 Changes the color phase of skin
‫׀‬ tone areas in memory bank B in
359 a range of 0 to 359 on a vector
display.
0
Expands the width of skin tone
‫׀‬ areas in memory bank B in a
255 range from 0 to 255.
0 Changes the saturation of skin
‫׀‬
tone areas in memory bank B in
255 a range from 0 to 255.
OFF Adds a zebra pattern to the
A Y signals of the PM output to
B
make areas subject to skin tone
A+B detail effects easily visible.
A Selects the memory bank to
B which skin tone detail effects will
A+B
be added.
ＯＮ
３
５
０
３．１７Ｍ
ＯＦＦ
５％
１
( indicates factory default settings.)
Function
ON Enables or disables changes in
OFF contour enhancement (hard/soft)
level of SDTV video output.
0 Adjusts the amount of vertical
‫׀‬ detail.
3
‫׀‬
63
0 Adjusts the amount of horizontal
‫׀‬ detail.
5
‫׀‬
63
0 Sets the maximum amplitude of
‫׀‬ the very faint noise components
63 that are removed from detail
components.
Selects one of the two contour
correction frequency bands
(boost frequency or peak
6.75M frequency). Changes the contour
width.
Item Display
PEAK2 OFF/1.89M/
2.18M/2.56M/
3.17M/4.00M/
.5.28M/6.75M
LEVEL.
DEPENDENT
DARK.DETAIL
SYSTEM.(1/2)
→＊＊ ＳＹＳＴＥＭ （ １／２ ） ＊＊
ＲＥＴＵＲＮ１
ＲＥＴＵＲＮ２
ＲＥＴＵＲＮ３
ＲＥＴＵＲＮ４
ＲＥＴＵＲＮ・ＤＥＬＡＹ
ＤＯＷＮ ＣＯＮＶＥＲＴ ＭＯＤＥ
ＵＰ ＣＯＮＶＥＲＴ ＭＯＤＥ
ＨＤ ＣＯＬＯＲ ＢＡＲ
ＰＡＴＨＯ
ＳＤＩ３－４ ＯＵＴ
Item Display
RETURN1 HD.SDI1
HD.SDI2
SD.SDI1
SD.SDI2
RETURN2 HD.SDI1
HD.SDI2
SD.SDI1
SD.SDI2
RETURN3 HD.SDI1
HD.SDI2
SD.SDI1
SD.SDI2
RETURN4 HD.SDI1
HD.SDI2
SD.SDI1
SD.SDI2
RETURN.·. NORMAL
DELAY SHORT
DOWN.
CONVERT.
MODE
*
1
The items that can be selected as the display range differ depending
on the setting of [OPERATION]-[SETTING1]-[SDI RETURN1]/[SDI
RETURN2] of HCU200.
[HD] and [SD] in [SDI RETURN1] of HCU200 are linked to [HD SDI1]
and [SD SDI1] of the unit.
[HD] and [SD] in [SDI RETURN2] of HCU200 are linked to [HD SDI2]
and [SD SDI2] of the unit.
For example, when [HD] is set in [SDI RETURN1] of HCU200, [HD
SDI1] can be selected but [SD SDI1] cannot be selected on the unit.
Function
Selects one of the two contour
correction frequency bands
(boost frequency or peak
frequency). Changes the contour
width.
0 Lowers the detail in dark areas.
‫׀‬ It adjusts the level.
5.%
‫׀‬
30.%
0
‫׀‬
1
‫׀‬
5
ＨＤ ＳＤＩ１
ＨＤ ＳＤＩ２
ＨＤ ＳＤＩ１
ＨＤ ＳＤＩ２
ＮＯＲＭＡＬ
ＳＣ
ＳＣ
ＡＲＩＢ
ＯＦＦ
ＰＭ
( indicates factory default settings.)
Function
Sets the input allocations of
return signal 1.
* 1
VBS
Sets the input allocations of
return signal 2.
* 1
VBS
Sets the input allocations of
return signal 3.
*
1
VBS
Sets the input allocations of
return signal 4.
* 1
VBS
Selects whether a RET display
video will be delayed by 1 F
(NORMAL) or by the shortest
possible period (SHORT).
SC Selects the down-conversion
SQ system for video output from SD
LB SDI and VBS.