Panasonic AK-HRP200G Operating Instructions Manual page 8

Setup.mode.
(continued)
„ Setup.mode.menu.configuration
„
Setup mode is comprised of the menus and submenus listed in the table below.
Menu
UP
ND CC SHT SYNC CAMERA
M.GAIN M.PED
DATA
SET
IRIS
DOWN DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
SAVE/LOAD EXIT EXECUTE
UP+DOWN
Press <SELECT>to select a menu number.
No. Menu.item
1 Set camera number
2 Save scene file to/load scene file
from memory card
3 Save user file to/load user file
from memory card
4 Save lens file to/load lens file
from memory card
5 Save ROP configuration file to/
load ROP configuration file from
memory card
6 Format memory card
7 Select/set flare and pedestal
8 Set buzzer (beep/Call)
9 Set display brightness (LED/7-
segment display)
* 1
10 Set IP address
* *
1 2
11 Set subnet mask
*
1
12 Set default gateway
13 Set port
* 1 * 2
14 Save/load remote camera
configuration file
15 Set serial
*
1
16 Initialize settings
17 Confirm version
18 Save unit data to memory card
19 Upgrade software
20 Set tally number
* 1
21 Set tally output
* 1
22 Syncro shutter display setting
23 Tally control setting
*
1
These functions are initialized when you perform settings initialization.
*
2
If you change a setting, restart the unit when you exit setup mode.
*
3
This setting is enabled when the camera recorder is connected.
8
UP
ND
10-19
M.GAIN
DATA
SET
No.
DOWN DISPLAY SELECT
SELECT
ND/CC M.GAIN/M.PED SHUTTER
SET UP
SHIFT
+
SAVE/LOAD
UP+DOWN
Press <SAVE/LOAD> to select a submenu.
Light.
indication
- -
* 1
ND Save to memory card
CC Load from memory card
ND Save to memory card
CC Load from memory card
ND Save to memory card
CC Load from memory card
ND Save to memory card
CC Load from memory card
- -
- -
* 1
- -
* 1
ND LED
CC 7-segment display
ND Block 1
CC Block 2
SHT Block 3
SYNC Block 4
ND Block 1
*
2
CC Block 2
SHT Block 3
SYNC Block 4
ND Block 1
* 1 * 2
CC Block 2
SHT Block 3
SYNC Block 4
ND 3 digits
CC 2 digits
ND Save to memory card
CC Load from memory card
- -
- -
ND Display version No (first digits)
CC Version No (middle digits)
SHT Version No (last digits)
- -
- -
- -
- -
- -
- -
*
3
Submenu
CC SHT SYNC CAMERA
M.PED 10-19
No.
IRIS
SELECT
EXIT EXECUTE
Use <UP> or <DOWN> to select a set value or
an operation.
Use <EXECUTE> to confirm an entry.
Settings.and.operations 7-segment.display.(display.and.selection)
Camera number
(AK-HC3500A: 1 to 15)
(AK-HC3800: 1 to 19)
Scene files (1 to 4)
Scene files (1 to 4)
User files (1 to 3)
User files (1 to 3)
Lens files (1 to 32)
Lens files (1 to 32)
-
-
-
FLARE/PED (FL/PE)
Enable/disable buzzer (on/off)
3 levels (bright/intermediate/low)
3 levels (bright/intermediate/low)
Display/set block 1
Display/set block 2
Display/set block 3
Display/set block 4
Display/set block 1
Display/set block 2
Display/set block 3
Display/set block 4
Display/set block 1
Display/set block 2
Display/set block 3
Display/set block 4
Display/set 3 digits
Display/set 2 digits
Camera files (1 to 19)
CCU serial (1)
Remote camera serial (2)
Camera recorder serial (3)
-
Displays the first 3 digits
Displays the middle 2 digits
Displays the last 3 digits
-
-
Tally numbers (1 to 19, --)
Tally link (on/off)
SEC/DEG(SEC/dEG)
1 (panel operation) / 2 (preview terminal)
Set.value/Selected.operation
UP
ND CC SHT SYNC CAMERA
M.GAIN M.PED 10-19
DATA
SET
No.
IRIS
DOWN DISPLAY SELECT
SELECT
ND/CC M.GAIN/M.PED SHUTTER
SET UP
SHIFT
+
SAVE/LOAD EXIT EXECUTE
UP+DOWN
Default.
value
1
1
1
1
1
1
1
-
-
-
FL
on
Bright
Bright
192.168.0.130
255.255.255.0
192.168.0.1
35200
1
1
-
-
-
-
-
-
1
off
SEC
1