How To Start The Software; Connecting The Devices; Connecting And Setting The Personal Computer; Setting The Ip Addresses Of The Devices - Panasonic AK-HRP200G Operating Instructions Manual

IP.connection.
(continued)
How.to.Start.the.Software
Visit the product support desk of the following website to download the
software.
http://pro-av.panasonic.net/
„ Installing.Easy.IP.Setup.Software
„
<Note>..
Easy IP Setup Software cannot be used with camera recorders.
1..
Download.the.zip.file.for.Easy.IP.Setup.Software.
(EasyIPSetup.exe).from.the.website's.product.support.
desk.
2..
Double-click.the.downloaded.zip.file.and.extract.it.
Be sure to read "Readme.txt" before installing the software.
3..
Double-click."EasyIPSetup.exe".in.the."EasyIPSetup".
folder.
Easy IP Setup Software starts.
„ Installing.ROP.Setup.Software
„
1..
Download.the.zip.file.for.ROP.Setup.Software.(ROPSetup.
exe).from.the.website's.product.support.desk.
2..
Double-click.the.downloaded.zip.file.and.extract.it.
Be sure to read "Readme.txt" before installing the software.
3.. Double-click."ROPSetup.exe".in.the."ROPSetup".folder.
ROP Setup Software starts.
Connecting.the.devices
Connect the ROP, CCU, remote cameras and camera recorders with IP
connections.
Be sure to use a switching hub or similar device and connect the
devices with straight LAN cables.
Turn on the power of each device.
Connecting.and.setting.the.personal.computer
Connect the personal computer with Easy IP Setup Software and ROP
Setup Software installed with an IP connection.
Configure the network settings of the personal computer.
Configure the network settings of the personal computer for the same
segment as the devices being connected.
The recommended settings are shown below.
192.168.0.200
IP address: • Change the IP address if it is a duplicate of that of
another device.
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Setting.the.IP.addresses.of.the.devices
„ Configuring.the.settings.using.the.menus
„
Set the IP address of the unit (ROP) in setup mode.
No. Item
10 IP address
11 Subnet mask
12 Default gateway
For the IP addresses of the CCU, remote cameras and camera
recorders, refer to the operating instructions of the corresponding
devices.
„ Configuring.the.settings.using.Easy.IP.Setup.Software
„
Use Easy IP Setup Software to set the IP address of each device.
(→page 35)
Configuring.various.settings.of.the.ROP
Use ROP Setup Software to configure various settings. (→page 35)
Reference.page
page 15
page 15
page 16
33