Siemens SINAMICS S120 Equipment Manual page 388

Accessories
7.1 Shield connecting plates
Table 7-5 Electrical connection at the shield connecting plate for 200 mm component using as an example, internal air
cooling
Unlock and remove the cover of the
terminal block.
Adjust the shock-hazard protection
using a suitable tool.
388
Remove nuts M8 using a suitable tool.
Attach the shock-hazard protection.
Secure the earthing cable with
screwdriver T25 and the power cable
with torque spanner M8/13 Nm.
Secure the shield clamp to the shield
connecting plate using a suitable tool
Equipment Manual, (GH2), 07/2007, 6SL3097-2AC00-0BP5
Booksize Power Units