Mounting - Siemens SINAMICS S120 Equipment Manual

Booksize power units

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Mounting

If a 50 mm wide component or if a DC link component with the appropriate width (e.g.

Braking Module, CSM, VCM) is located on the left-hand side of the drive line-up, the

DC link bridge including all of the screws must be removed. The screws must not be

inserted without a DC link bridge.

For all other power units and DC link components (e.g. Capacitor Module) that are wider

than 50 mm, it is not permissible to remove the DC link bridge.

If this is not carefully observed, this can result in damage and accidents.

Required tools:

● Flat-bladed screwdriver 1 (0.5 x 3.5)

● Torx screwdriver T10

● Torx screwdriver T20

Booksize Power Units

Equipment Manual, (GH2), 07/2007, 6SL3097-2AC00-0BP5

7.2 DC link rectifier adapter