Mounting The Positioner To Rotary Actuators - ABB HART Industrial IT enabled TZIDC Operating Instructions Manual

3.1.4 Mounting the positioner to rotary actuators

The following mounting kit is available for mounting to a rotary actuator according to VDI/
VDE 3845:
Fig. 11 Mounting kit for rotary actuators
Tools required:
41/18-79 EN
1.0
1.4
2.0
2.1
2.2
2.3
Wrench 10 mm /13 mm
Allen key 3 mm
Electro-pneumatic positioner TZIDC
• Adapter (1.0) with
spring (1.4)
• Four
(1.1),
washers (1.2), and
1.3
four plain washers
(1.3) for fastening
1.2
the bracket (2.0) to
the positioner
1.1
• Mounting
(2.0)
• Four
(2.1),
washers (2.2), and
four plain washers
(2.3) for fastening
the bracket to the
actuator
screws, M6
four spring
bracket
screws, M5
four spring
17