Basic Trunk Data Setup; Description - NEC Aspire Series Networking Manual

14-01 : Basic Trunk Data Setup

Level:
IN

Description

Input Data
Trunk Port Number
Item
No.
01 Trunk Name
Set the names for trunks. The trunk name
displays at display keysets for incoming
and outgoing calls.
02 Transmit CODEC Gain Type
Use this option to select the CODEC gain
for the trunk. The option sets the amount
of gain (signal ampliÞcation) for the trunk
you are programming.
03 Receive CODEC Gain Type
Use this option to select the CODEC gain
for the trunk. The option sets the amount
of gain (signal ampliÞcation) for the trunk
you are programming.
04 Transmit Gain Level for Conference
and Transfer Calls
Use this option to select the CODEC gain
type used by the trunk when it is part of an
Unsupervised Conference.
05 Receive Gain Level for Conference and
Transfer Calls
Use this option to select the CODEC gain
type used by the trunk when it is part of an
Unsupervised Conference.
Networking
Aspire S
• Available.
• Item 24 available with software 2.63+.
• Item 25 available with software 4.0E+.
• Item 26 available with software 4.93+.
• Item 27 available with software 4.93+.
Use Program 14-01 : Basic Trunk Data Setup to set the basic options for each trunk port. Refer
to the chart below for a description of each option, its range and default setting.
Item
14-01 : Basic Trunk Data Setup
• Available.
• Item 24 available with software 2.63+.
• Item 25 available with software 4.0E+.
• Item 26 available with software 4.93+.
• Item 27 available with software 4.93+.
Aspire: 001-200
Input Data
Up to 12 characters
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
Programming
Aspire M/L/XL
Aspire S: 1-8
Default
1 = Line 001
|
Line 200 = Line 200
32 (0dB)
32 (0dB)
22 (-5dB)
22 (-5dB)
Related
Program
◆ 157