NEC Aspire Series Networking Manual page 29

Programming
Item
Item
No.
01 NTCPU 1.0.0.1 - 126.255.255.254
IP Address 128.1.0.1 -191.254.255.254
192.0.1.1 - 223.255.254.254
02 NTCPU 128.0.0.0
Subnet 240.0.0.0
Mask 254.0.0.0
255.192.0.0
255.252.0.0
255.255.128.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
Networking
Setting Up The Networking Feature
Also refer to the
required programming.
➻
10-12-01 : NTCPU Network Setup - IP Address
Select the IP address of the NTCPU (default: 172.16.0.10). A static IP address is required by
the NTCPU. Each Aspire system in the network must have a unique IP address.
must be reset in order for the change to take effect.
➻
10-12-02 : NTCPU Network Setup - Subnet Mask
Select the Subnet Mask to be used by the IP server (default: 255.255.0.0).
Input Data
192.0.0.0
248.0.0.0
255.0.0.0
255.224.0.0
255.254.0.0
255.255.192.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
Example:
System – A
IP Address: 172.16.0.10
Subnet Mask: 255.255.0.0
➻
10-20-01 : LAN Setup for External Equipment - TCP Port
DeÞne the TCP port number for communicating to external equipment. The port number
deÞned should be the same in each networked system.
Type of external equipment
Numbering Plan (page 32)
224.0.0.0
252.0.0.0
255.128.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
System – B
IP Address: 172.16.0.11
Subnet Mask: 255.255.0.0
1- CTI Server
2- ACD MIS
3- - Reserve -
4- Network Listener
5- SMDR
6- DIM Access
IP Networking
feature for additional
Default Conditions
172.16.0.10
255.255.0.0 The setting of Subnet-
Mask is mistaken when
all Host Address are 0.
If the network section
is:
0,
127
128.0
191.255
192.0.0
223.255.255
The setting of Subnet-
Mask is mistaken.
The system
◆ 19