Feature Cross Reference - NEC Aspire Series Networking Manual

Programming
45-01 : Voice Mail Integration Options
Conditions

Feature Cross Reference

216 ◆
05 Message Wait
Enable/disable the system's ability to pro-
cess the Voice Mail's Message Wait (#)
commands. You should normally enable
this option. If enabled, be sure that the
programmed Message NotiÞcation strings
don't contain the code #9 for trunk
access.
06 Record Alert Tone Interval Time
This timer sets the interval between voice
Mail Conversation Record alerts
07 Mailbox Number
Enter the extension number of the voice
mail to be accessed as the centralized
voice mail unit when the Networking fea-
ture is used.
08 Networked Voice Mail Department
Group Number
Assign which Extension (Department)
Assign which Extension (Department)
Group number is to be assigned as the
voice mail group with a networked sys-
tem. An entry of '0' means there is no
voice mail installed. When using Central-
ized Voice Mail with Aspire Mail or Intra-
Mail, this program and Program 45-01-01
must both be programmed with the same
group number. Otherwise, the audio path
may not connected properly.
09 Networked Voice Mail Master Name
Enter the Voice Mail master name
(networked system).
10 NSL Protocol Support
Aspire M/L/XL Only
This option must be enabled (1) in order
for the display to use the NSL protocol.
None
● Voice Mail
0 = Off
1 = On
0-64800 seconds
Up to 8 Digits
Aspire S: 0 - 8
Aspire: 0 - 64
(0=no voice mail)
Up to 12 Characters
0 = NSL Protocol Disabled
1 = NSL Protocol Enabled
1
0
-
0
C.V.M.
0
Networking