84-04 : VOIPU PCB DHCP Server Mode Setup
Level:
MF
Description
Input Data
Conditions
Feature Cross Reference
Networking
84-04 : VOIPU PCB DHCP Server Mode Setup
Aspire S
•
Available.
•
Applicable to IP Networking.
•
With software 2.63+, this program requires
the manufacturer level password.
Use Program 84-04 : VOIPU PCB DHCP Server Mode Setup to determine whether the VOIPU
PCB should use a manually assigned IP Address or if it should obtain its IP Address from a DHCP
server.
Item No.
01
DHCP Server Mode
DeÞne whether or not the DHCP Server is used.
If this item is set to 0:Disable, the values in Pro-
gram 84-05 will be used.
If this item is set to 1:Enable, the VOIPU will try
to obtain an IP address from a DHCP Server. The
DHCP server could be external (i.e. on the LAN),
or could be the NTCPU (if Program 10-13-01 is
enabled)
The system programming must be exited before this program option takes affect.
●
VoIP
•
Available.
•
Applicable to IP Networking.
•
With software 2.63+, this program requires
the manufacturer level password.
Description
Programming
Aspire M/L/XL
Input Data
Default
0:Disable
0
1:Enable
◆ 227