NEC Aspire Series Networking Manual page 53

Related Programs
Networking
Refer to the Aspire Software Manual (P/N 0893200) for full programming details.
Program Number
ARS
26-01-01 ARS Service
26-02-02 Dial Analysis Table for ARS
26-02-03 Dial Analysis Table-Additional Data/Service Number for ARS
26-03-01 ARS Dial Treatments
F-Route
11-01 Numbering Plan
44-01 System Options for F-Route Service
44-02 Dial Analysis Table for F-Route Access
44-04 F-Route Selection for time schedule
44-05 F-Route Table
44-06 Additional Dial Table
44-07 Gain Table for F-Route Access
44-08 Time Schedule for F-Route Service
44-09 Weekly Schedule for F-Route Service
44-10 Holiday Schedule for F-Route Service
➻
26-01-01 : Automatic Route Selection Service - ARS Service
Enable (1) or disable (0) ARS.
➻
26-02-01 : Dial Analysis Table for ARS/LCR - Dial
Enter the digits (16 digits maximum: 1-9, 0 * #, @; 400 separate entries) for the Dial Analysis
Table which will be analyzed by ARS/LCR. This table will be checked after any programmed
F-Route operations have completed. The system will then refer to Program 26-02-02 and 26-
02-03 to determine the routing for the call. To enter a wild card/don't care digit, press Line
Key 1 to enter an @ symbol. It is important to remember that the system checks the table
numbers in numerical order. This means that entries for speciÞc numbers should be entered
Þrst (such as your local area codes), then enter the items containing wild card digits. If the
system sees an entry of "2@@" then any table entries which follow will be ignored.
For example, if 268, 269, and 270 are local exchanges, these would be the Þrst three table
entries which would route according to the settings made in Program 26-02-02 and 26-02-03
for each of the table entries. If the next entry is "2@@", then the system checks no further in
this program and routes all other "2xx" numbers according to the entries made in Program 26-
02-02 and 26-02-03 for this table entry.
Features
ARS/F-Route
Title
◆ 43