Voipu Setup; Description - NEC Aspire Series Networking Manual

84-06 : VOIPU Setup

Level:
IN

Description

Input Data
SLOT Number
Item
Item
No.
01 RTP Port Number
02 RTCP Port Number
03 H.245 Port Number
04 Fractlost Threshold
05 Packets Lost Threshold
06 Ext High Sequence
Threshold
07 Jitter Threshold
08 Last LSR Threshold
09 Delay LSR Threshold
10 DTMF Behavior
Networking
Aspire S
• Available.
• Items 13 and 14 available.
• Item 15 available with software 2.65+.
Use Program 84-06 : VOIPU Setup to setup the details of VOIPU PCB.
Input Data
0-65535
RTP Port Number + 1
0-65535
0-4294967295 ms
0-4294967295
0-4294967295
0-4294967295 sec
0-4294967295
0-4294967295
0 = DTMF Relay disabled
1 = In-Band DTMF relay,
do NOT report to Host
processor
2 = Out of Band DTMF
relay, do not pass tones as
voice
Programming
84-06 : VOIPU Setup
Aspire M/L/XL
• Available.
• Items 13 and 14 available with software
1.18+. Requires VOIPU PCB Þrmware
3.2+.
• Item 15 available with software 2.65+.
01-16
Default
10020 Set the UPD port number to be used for
RTP trafÞc.
10021 This must be set to RTP Port Number
(item 01) + 1.
10100
0 The data will be sent to the NTCPU if the
value exceeds the deÞned value.
0 The data will be sent to the NTCPU if the
value exceeds the deÞned value.
0 The data will be sent to the NTCPU if the
value exceeds the deÞned value.
0 The data will be sent to the NTCPU if the
value exceeds the deÞned value.
0 The data will be sent to the NTCPU if the
value exceeds the deÞned value.
0 The data will be sent to the NTCPU if the
value exceeds the deÞned value.
0 • Inbound - DTMF is transferred by
RTP packets.
• Outbound - DTMF is transferred by
H.245 protocol.
This setting allows DTMF digits to be
relayed between the VOIPU PCBs. It is
recommended that this is set to "1".
Description
◆ 231