H.225, H.245 Information Basic Setup; Description - NEC Aspire Series Networking Manual

Programming

84-02 : H.225, H.245 Information Basic Setup

84-02 : H.225, H.245 Information Basic Setup
Level:
IN

Description

Input Data
Item
No.
01 H.225 Alerting Timer
02 H.225 Setup Acknowledge Timer
03 H.225 Setup Timer
04 H.225 Info Ack Timer
05 H.225 Call Proceeding Timer
06 -- Not Used --
07 H.245 Master Slave Determination Timer
08 H.245 Master Slave Determination Retry
Count
09 H.245 Capability Exchange Timer
10 H.245 Logical Channel Establishment
Timer
11 H.245 Mode Request Procedures Timer
12 H.245 Close Logical Channel Timer
13 H.245 Round Trip Delay Timer
14 H.245 Maintenance Loop
15 RAS GRQ Timer
16 GRQ Retry Count
17 RAS RRQ Timer
18 RRQ Retry Count
19 RAS URQ Timer
224 ◆
Aspire S
• Available.
• Applicable to IP Networking.
Use Program 84-02 : H.225, H.245 Information Basic Setup to deÞne the data of H.225 and
H.245.
It is recommended that these settings are left at the default values unless you are advised to change
the values by NEC Infrontia.
Item
• Available.
• Applicable to IP Networking.
Input Data Default
0-255 sec 180 sec
0-255 sec 9 sec
0-255 sec 4 sec
0-255 sec 9 sec
0-255 sec 10 sec
0-255 sec 5 sec
0-255 sec 3 sec
0-255 sec 5 sec
0-255 sec 50 sec
0-255 sec 50 sec
0-255 sec 50 sec
0-255 sec 50 sec
0-255 sec 50 sec
0-255 sec 5 sec
0-255 2
0-255 sec 5 sec
0-255 3
0-255 sec 3
Aspire M/L/XL
Description
Unidirectional or bi-directional logi-
cal channel establishment timer
Networking