Operator, Centralized - NEC Aspire Series Networking Manual

Features

Operator, Centralized

Operator, Centralized
Operator, Centralized
Operation
78 ◆
It is possible to have a centralized network operator extension that can be dialed with the operator
access code (0).
Calls to the operator will be queued and answered in order. Up to 32 calls can be queued at the
operator extension. The quantity of network calls that can queue at the operator may be limited by
the quantity of networking channels available.
The network numbering plan must be set up to route the operator access code (0) to the system that
has the operator extension. The operator extension must be set in Program 20-17-01.
Centralized Operator
System A
Centralized Operator
(Extension 2200)
● At System A, extension 2200 must be set as the operator extension in Program 20-17-01.
●
At System B, dial 0 must be set as networking in Program 11-01 and routed to the node ID of
System A.
● Users at System A and B can access the operator by dialing 0.
System B
Networking