Feature Cross Reference; Telephone Programming Instructions - NEC Aspire Series Networking Manual

Programming
84-06 : VOIPU Setup
11 Ready/Ready-Answer
Port Number
12 Long Tail Echo (LTEC)
Mode
13 Long Tail Echo Code
(LTEC) Type
14 Long Tail Echo (LTEC)
Tail Size
15 10ms Payload Mode
Conditions

Feature Cross Reference

Telephone Programming Instructions

232 ◆
0-65535
0 = Off
1 = On
1 = G.729AB
2 = G.723.1
1 = 8msec
2 = 16msec
3 = 32msec
4 = 64msec
5 = 128msec
0 = Off
1 = On
The system programming must be exited before these program options to take affect.
●
VoIP
To enter data for Program 84-06 (VOIPU Setup):
1. Enter the programming mode.
2. 84 06
84-06-01 Slot1
RTP Port No. 10020
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
back
3. Enter the number of the item you want to program.
84-06-nn Slotnn
nnnnn
← ← ← ←
4. Select the slot number to be programmed by pressing the FLASH or the VOLUME
▼
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
4000
0
1
5
0
select
→ → → →
▲
or
Networking