Figure 2-2 Free Location; Figure 2-3 Centralized Mat On Fusion Network - NEC NEAX 2400 IMX Manual

GENERAL
Free Numbering
2. Free Numbering
A Telephone Number can be assigned to a desired station on the Fusion network using the simple command
operation shown below.
In this figure, the user is changing the location of Telephone Number "411111" to Node B.
MAT
Telephone #: 411111
STN: 2000
Node A Node A
Telephone #: 411111
Node B Node B STN: 2000
user
Note: The ALGSN command is used for assigning Telephone Numbers. See 5.6 "Assignment of Telephone Numbers" for more
detail.
2.1 Centralized Maintenance Administration Terminal (MAT)
A Fusion network has one Network Control Node (NCN) and Local Nodes (LNs). The NCN has the Cen-
tralized-MAT, which runs on Windows 95/NT. The MAT can collect fault information from all nodes on
the network. The NCN has Network Data Memory, which stores the data related to network level. The Tele-
phone Numbers, for example, can be changed using the Centralized-MAT at the NCN. The MAT also al-
lows the user to manage network-level office data.
Fault information can be collected at NCN via Fusion Link.
Fault Information
Node B
December 12 1997
AM 3:12:13
Node B FCH Failure
MG: 00
U : 02
G : 11
Note
:
:
:
Actual system message is indicated in a different format.
Note:
CHAPTER 2
Page 4
Revision 3.0
Telephone Number
411111
Node A
STN 2000
Note
NCN

Figure 2-2 Free Location

PRT
MAT
13-H 13-H
1. xxxx xxxx 0010 1222 1. xxxx xxxx 0010 1222
4. x0010 1110 10110 1FFF 4. x0010 1110 10110 1FFF
7. E23C CAAB12 000 0000
7. E23C CAAB12 000 0000
NEC

Figure 2-3 Centralized MAT on Fusion Network

ND-70185 (E)
Get other manuals https://www.bkmanuals.com
Node C
STN 2000
Node B
LN
Fusion Network
STN 2000
LN
NCN: Network Control Node
LN: Local Node
STN: Physical Station Number
Node A
Fusion Link
Node B
Fusion Network
NCN
Fault Information
FCH fault....
LN
NCN: Network Control Node
Node C
LN
LN: Local Node