Figure 5-24 Mounting Fch And Dti Cards In High-Density Slots - NEC NEAX 2400 IMX Manual

DATA PROGRAMMING
Assignment of Telephone Numbers
6.1.2 When FCH is Mounted in a High Density Slot
If the FCH is to be mounted in the High Density Slot, the connection trunk data should be assigned as
shown in the figures below.
and 12.
The figure below shows an example where these cards are mounted in slots 11, and 12.
00 02 04 05 06 07 08 09 10

Figure 5-24 Mounting FCH and DTI Cards in High-Density Slots

CHAPTER 5
Page 78
Revision 3.0
Figure 5-24 shows an example where these cards are mounted in Slots 11
15
01 03 05 07 09 11
14
13
00 02 04 06 08 10
12
ND-70185 (E)
Get other manuals https://www.bkmanuals.com
11 12 13 14 15 16 17 18 19 20 21 22 23
01 03 05
00 02 04
15 19 23
07 09 11
14 18 22
13 17 21
06 08 10
12 16 20