Figure 5-18 Algsn Sample Data Sheet - NEC NEAX 2400 IMX Manual

DATA PROGRAMMING
Assignment of Telephone Numbers
6. Assignment of Telephone Numbers
This section explains how to program Telephone Numbers. To program Telephone Numbers, use ALGSN com-
mand. Telephone Number can be assigned to a station using the LENs or the Physical Station Number depend-
ing on programming.
The Fusion Link must be operational before programming telephone numbers in the Fusion Network.
Note:
COMMAND: ALGSN/ATSTN
Assign Telephone Numbers to Physical Station Number (Type 2) or to physical LENS (Type 1) using
the ALGSN/ATSTN command. An example data sheet-Type 2 follows.
- ALGSN Data Sheet (example)
- NCN (Node A)
Type = 2
Type = 2
Type = 2
Type = 2
Type = 2
Note: This data is a sample when the Telephone Number is assigned by the ALGSN command.
CHAPTER 5
Page 70
Revision 3.0
Telephone Number
UGN = 1 TELN = 410000
UGN = 1 TELN = 410001
UGN = 1 TELN = 420000
UGN = 1 TELN = 430000
UGN = 1 TELN = 440000
:
:
:
:

Figure 5-18 ALGSN Sample Data Sheet

ND-70185 (E)
Get other manuals https://www.bkmanuals.com
FPC = 1 TN = 1 STN = 2000
FPC = 1 TN = 1 STN = 2000
FPC = 11 TN = 1 STN = 2000
FPC = 12 TN = 1 STN = 2000
FPC = 13 TN = 1 STN = 2000
Physical Station Number
Node A
Node B
Node C
Node D