Introduction - Siemens SIPLUS HCS Series Operating Instructions Manual

Introduction

1.1 Introduction
Purpose of this documentation
These operating instructions contain the information you require to commission, operate and
service the HCS4300 heating control system.
Target group
The documentation is intended for qualified personnel in the following specialist fields:
● Operators, project engineers, programmers
● Electrically skilled personnel who assemble, connect and start up the device.
Required basic knowledge
● These operating instructions require prior knowledge of programming an S7 controller or
SIMOTION.
● Knowledge of working with the PROFINET or PROFIBUS fieldbus is also necessary.
History
The following earlier release versions of these operating instructions have been published:
Edition
11/2014
10/2015
12/2016
04/2018
10/2019
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
Comment
First edition
Expansion with POM with panel mounting, PROFIBUS, I/O modules, expansion
module for additional 2 × 8 POMs
Expansion with configuration control
Commissioning support using PRONETA
Expansion with phase control functionality for POM4320
Expansion with POM4320 Highend
1
9