Installing The Central Interface Module - Siemens SIPLUS HCS Series Operating Instructions Manual

5.3

Installing the Central Interface Module

Tool
You will need a Torx T10 screwdriver.
Mounting the Central Interface Module (CIM)
The CIM is screwed directly onto the POM. The mounting procedure is described below:
Figure 5-3
Steps
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
Mounting the CIM
1
Plug the CIM into the POM by means of the four connecting lugs
2
Tighten the four screws
5.3 Installing the Central Interface Module
②
.
Installing/mounting
①
.
49