Siemens SINAMICS S120 Manual page 169

Order no.
Rated short-circuit current acc. to IEC
Minimum short-circuit current
- For a parallel connection
The base load current I
1)
300 s.
The power required for the 500/690 V AC auxiliary supply is provided by the supply input voltage.
2)
The specified power loss equals the maximum value at 100 % capacity utilization. The value in normal operation is
3)
lower.
Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request.
4)
The cabinet height increases by 250 mm with IP21 degree of protection, and by 400 mm with IP23, IP43 and IP54
5)
degrees of protection.
Current required for reliable tripping of the protective devices.
6)
Cabinet Modules
Manual, 03/2013, A5E03263538A
6SL3730-
kA
A
6)
is based on a duty cycle of 150 % for 60 s or I
H DC
1TG33- 1TG34- 1TG36-
0AA3 3AA3 8AA3
65 65 84
3000 4400 8000
for 5 s with a duty cycle duration of
max DC
Cabinet Modules
5.2 Basic Line Modules
1TG41- 1TG41- 1TG41-
1AA3 4AA3 8AA3
100 100 100
2000 2500 3200
4000 5000 6400
167