L50, Cabinet Lighting With Service Socket - Siemens SINAMICS S120 Manual

8.37

L50, cabinet lighting with service socket

Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
Description
Option L50 includes cabinet lighting with an additional service socket for a connector with
protective ground contact (connector type F) according to CEE 7/4. The power supply for the
cabinet lighting and the service socket is external and must be fuse-protected for max. 10 A.
The cabinet lighting consists of an LED hand lamp with on/off switch and with magnetic
fasteners and an approx. 3 m long connecting cable. When delivered from the factory, the
lamp is already positioned at the defined marks in the cabinet door and the connecting cable
is wound on the holder.
Note
During operation of the cabinet unit, the cabinet lighting must remain attached in its position
on the cabinet door. The position on the cabinet door is marked by an adhesive label. The
connecting cable must be wound on its holder.
Connection
Table 8- 61
Terminal
Max. connectable cross-section: 4 mm
Cabinet Modules
Manual, 03/2013, A5E03263538A
Terminal block X390 – connection for cabinet lighting with service socket
Designation
1 L1
2 N
3 PE
8.37 L50, cabinet lighting with service socket
Technical data
power supply
Protective conductor
2
230 V AC
Options
501